GQ50 Rebar Cutting Machine For Rebar Splicing , Rebar Processing Machine , Construction Machine Rebar Cutter

Description

GQ40,GQ50 cutting machine for rebar splicing is produced according to JG/T5085-1996 standard. It can be applied to cut the plain carbon steel, hot rolled steel and deformed bar in the reinforced concrete structure for construction projects, but also suit for square steel,flat steel and angle steel. The machine is an ideal equipment for cutting, and widely used in machine processing and construction industry

Main Technical Parameters

Cutting Rebar Diameter Range: 14mm-28mm (GQ50)

14mm-32mm (GQ40)

Cut Flat Steel(max): 70mm×15mm (GQ40) 85mm×16mm (GQ50)

Cut Square Steel(max):(Q235-A)32mm×32mm (GQ40)

(Q235-A) 40mm×40mm (GQ50)

Cut Angle Steel(max): 50mm×50mm (GQ40),63mm×63mm (GQ50)

Cutter Nominal Stroke: 34mm

Punching Frequency: 32times/min

Motor Power: 3.0KW(GQ40) 4KW(GQ50)

Voltage: 380V

Motor Speed: 2880r/min

Dimension: 1280mm×460mm×720mm(GQ40),

1440mm×500mm×740mm(GQ50)

Weight: 430kg±5kg (GQ40), 530kg±5kg (GQ50)

Advantages:

1. Small volume, compact structure, solid and reliable.

2. Good lubricating property, adopt enclosed gear box, use the gear splashing to realize lubrication. It could be continuous work over one month.(oil level should not be below oil marking line, so that guarantee machine keeps in good lubrication condition).

3. Less functional loss because of the lubrication improvement. The gear section adopts rolling bearing, less resistance. Compared with same type cutting machine, it has a significant reduction in load power.

4. Easy to move, flexible, and convenient to maintenance.

5. The end face cut by this machine is vertical, round, flat and no angularity.

Features:

1-Incision is rounded, straight, non-angular, flat without angle

2-Good lubricating property, adopts high quality coppe wire motor, guarantee a more stable performance

3-Enhanced machine body, small volume, compact structure, solid and reliable