Automated Two Cylinder Hydraulic Thread Rolling Machine High Tensile Strength
 

    1. Product Description
     
   Rebar Upsetting Forging Machine is mainly used for construction of ribbed steel bar rolling straight thread head, is an important equipment of steel connection.
 
       Features
       
1. The tensile strength of this system can be reach 1.1 times of steel bar, make sure 100% BAR BREAK;
2.  Easy operation, high efficiency, forging and threading one rebar end only cost no more than one minute.

 
     
       Main Technical Parameter

         
 
   2. Operation
 
1- Installation

       After the mold is installed, reset the stroke limiting bracket. Adjust the travel limit screw so that the stroke control in 15mm, insert the test steel bar to the top of the mold center hole press automation button. After the processing of the work-piece, measurement it. If failed, then adjust stroke limit screw to make the trip gradually increased, until processing of qualified products.
       
 
 2- Safety operation rules
1. Workers have to be trained and tested OK then can work.
2. Before operation with rebar, first running the machine 2-3 mins without processing, if it is running normally the process.
3. The feeding head of head should be plain and straight.
4. Before processing the rebar, the machine should be reset and then process
to ensure the same processing.
5. The processing rebar can not have the transverse cracks, when the equipment break down should be eliminated timely.
6. Oil should be 68# hydraulic oil.
7. Workers should obey the safety rules
 
3- Machine Failure and Exclusion         
                                                                                              

 
     3. Hydraulic System

     
    4. Package & Delivery
 
      Package: in wooden case
      Delivery: 10-15 days after receiving the deposit.
       
      5. Our Service

• Best price
• Quality assured
• Fast reply
• Satisfied after-sale service

Welcome to visit our factory at any time!